Coated Drying Cylinders make Healthcare Laundry Maintenance Easier!

Great blog post from our friends at DECC. If you’re processing healthcare laundry, you may be experiencing the very problem that they can help you solve: melted plastic inside the dryers. Take a look for more information from our friend Randy at DECC:

Dryer Panel Coating – A Case Study

There’s also a great video explaining the process!

Tell them their friends at B&C Technologies sent you!

Please follow and like us:
error

Soft Water and Your Commercial Laundry

The importance of soft water in a commercial laundry

What if I told you that you could save money, reduce energy consumption, and increase your commercial laundry‘s efficiency?  If you’ve got hard water, the answer may be a phone call away.  Most of the United States has at least moderately hard water, so if you’re in an area with naturally soft water consider yourself lucky!  The map below gives a general look at water hardness levels throughout the US.  Of course, your mileage may vary.

(more…)

Please follow and like us:
error

Understanding Moisture Retention in your Commercial Laundry

In our industry, we spend quite a bit of time talking about G-force and how important it is to understand and account for.  In fact, there are a few posts dealing with the subject on this very blog!  As a companion to G-force, today we’ll talk about moisture retention and how this easy measurement plays into the overall efficiency and throughput of your commercial laundry as well as how it affects the drying and finishing operations as well as larger considerations like linen life.

(more…)

Please follow and like us:
error

G-Force and Your Commercial Washer

Most (but not all) manufacturers of commercial washers publish the G-Force of their washer-extractors. Have you ever wondered about the significance of this number and where it comes from?

(more…)

Please follow and like us:
error

The Importance of Wash Cylinder Volume in a Commercial Washer

Why are commercial washers and commercial dryers sold by capacity in pounds?  After all, when you purchase just about any other cylinder shaped object (like a washer basket or dryer basket) it would be rated in some unit of volume (quarts, gallons, bushels, etc.).  Most laundry carts have their capacities listed in bushels.  Even a lowly bucket has its capacity shown in quarts or gallons.  So why is there a difference when it comes to your washer or dryer?

(more…)

Please follow and like us:
error

Safety in your Commercial Laundry

Safety is of primary importance when operating your commercial laundry.  Injuries lead to lost time and productivity in the best case, while leaving the business open to lawsuits in the worst case.  While all manufacturers do what they can to make the machines as safe as possible, poor maintenance and usage can undo all of this good work and lead to injury if best practices are not followed.

(more…)

Please follow and like us:
error

Planning a Commercial Laundry?

Sometimes it’s tricky to figure out all the things you’ll need if you’re considering building or even adding onto an existing commercial laundry.  In this post, I’ll hit some of the high notes as well as give you some additional things to think about as you do your research.

(more…)

Please follow and like us:
error

Getting your Commercial Laundry Ready for the Season

Remember that end-of-season inspection report we talked about at the end of last season?  Time to break it out and go through each item so that your commercial laundry is ready to tackle the season ahead with a minimum amount of fuss.

Now that you’re months down the road, hopefully you took notes about that noise you wanted to check out before next season. Since you were proactive (right?), you have a big head start on maintenance that will leave your equipment in top condition and ready for another productive season.  Good machine care, with proper maintenance and repair not only helps ensure proper operation and long life, it helps maintain resale value.

(more…)

Please follow and like us:
error

The Real Truth about High Speed Hardmounts in Commerical Laundry

Have you noticed that we seem to be in a new arms race of sorts in the commercial laundry world?  Companies are upping the G force levels to attempt to get an edge in the market, but what does this mean in reality for you, the person writing the check?
(more…)

Please follow and like us:
error